GE Profile CustomStyle 24 Serie Manual Del Propietário página 20

Preparing to install the refrigerator.
Door Alignment
After leveling, make sure that doors are even at the top.
Tomake the doors even, a(!just tile flesh food door. Using a 3/16" Allen x_Tench or a 5/16" socket x_aench
(depending on model), uun the door a(!justing screw to the right to raise the door, to the let1 to lower it. (A
wlon plug, imbedded in the threads of the pin, preven/s the pin flom uuning unless a x_Tenchis used.)
Atter one or m{) turns of the x_aench, open and close the flesh food door and check the alignment at the top
of the doors.
Removebase grille byopening
the doors a ndpulling tbe grille
straightout.
or
5/16" Socket W rench
2
I_Raise
Dimensions and Specifications fief &stomStFe models)
24" Cabinet
Water
3/4" Airspace
(1/2" Gap+ 1/4"
Wall Plates)
24" Side Panels
Electrical
Counter Top
20