Sony SPP-SS964 Manual De Instrucciones página 15

To turn the ringer off
Set the RING switch on the bottom to OFF.
You can save battery power.
The handset won't ring. You can still make calls, and
also receive calls if another telephone connected to
the same line rings to inform you on incoming calls,
but you cannot receive an intercom call.
Receiving calls through the speakerphone
When you hear the phone ring, press
(SPEAKERPHONE) on the base phone.
The LINE lamp lights up.
When you're done talking; press
(SPEAKERPHONE) again.
To obtain the best speakerphone
performance, see page 13.
Additional tasks
To
Put a call on hold
Switch to another call
("call waiting" service*)
Adjust the speakerphone
volume
Turn on/off the ringer of
the base phone
* You need to subscribe to this service from your telephone company.
Note
Even when you set the RINGER switch on the base phone to OFF, the handset
will ring when the RING switch on the handset is set to ON.
Tips
• To inform you of an incoming call, the LINE lamp lights on and off according
to the ring signal even when you set the RINGER switch on the base phone to
OFF.
• If there is an incoming call while on the intercom, the base phone will ring
even when the RINGER switch on the base phone is set to OFF.
RINGER switch
Do this
Press (HOLD). The LINE lamp on the base phone
flashes.
Press (HOLD) again to resume the conversation.
Press (FLASH).
Press (FLASH) again to return to the first caller.
Slide the SPEAKER VOLUME control.
Set the RINGER switch on the base phone to ON to
turn the ringer on, or OFF to turn it off.
RING switch
(FLASH)
(SPEAKERPHONE)
(HOLD)
LINE lamp
SPEAKER VOLUME control
15 EN
Basics