Dyson pure hot+cool HP01 Instrucciones De Seguridad página 9

Sleep timer
To set the sleep timer, select the desired time.
When time reaches zero, the machine will go into
standby mode. To cancel, increase the time until
two dashes appear.
When using the sleep timer, the LED display will
turn off after 10 seconds of inactivity.
Diffused and focused modes
Diffused mode
Press the wide angle button
to change from a personal
directed airflow to a whole
room airflow.
Heating and cooling modes
work in this mode.
Personal heating mode
Press the narrow angle button
to change from whole room
heating to personal heating.
Heating and cooling modes
work in this mode.
Tilt function
Carefully hold the base and the main body. Tilt the amplifier
forward or backward for the required airflow angle.
Oscillation and airflow speed control
Oscillation control
To start the machine oscillating,
press the oscillation control
button. To stop the machine
oscillating, press it again. The
machine will not oscillate when
the control buttons are pressed.
Airflow speed control
To change the airflow speed
press the airflow control button.
The digital display will show
the new fan speed. If in heater
mode after 2.5 seconds it will
change back to displaying the
target temperature.
9