EnglisH
10
Problem
The appliance fails to heat the water to
boiling point.
The water tank does not drain properly
or does not drain at all.
The water flows straight into the
jug when I fill the water tank.
Solution
Make sure that the appliance is plugged in.
Make sure that the wall socket is live.
Make sure that the appliance is switched on.
Make sure that the appliance is plugged in.
Make sure that the wall socket is live.
Make sure that the appliance is switched on.
Make sure that the cover of the water tank is placed
correctly.
Descale and clean the coffeemaker. Pay special
attention to the rubber insert in the outflow opening
of the water tank (see chapters 'Descaling' and
'Cleaning').
Make sure that you place the cover on the water tank
before you fill it.
If you have just brewed coffee, let the appliance cool
down for 3 minutes before you brew coffee again.