Twin Needle Stitching _], It_L [], []; [] And [] - Kenmore Sears 385. 19153 Manual De Instrucciones

Twin needle stitching [], [_, _], [], _, _, [] and []
Set the machine
40
Thread tensioR: 5
A: Zigzag foot
F: Satin stitch _aot
,==O=======
Twin needle
Turn off and unplug the machine before changing the needle to the twin
needle. Insert the additional spool pin, and put the felt and spool on it with
the thread coming off the spool as shown.
Press the twin needle button.
When threading the machine for twin needle sewing follow this chart
makmg sure you separate the threads, placing one in each thread guide on
the sides of the needle bar,
Threading from C) to (_ ts the same as for singte thread. Refer to page 36.
(_) Draw the threads down and slide them through the lower thread guide.
(_ Slide one of the threads through the needle bar thread guide on the left,
and the other one on the right.
(_ Thread the needle from front to back.
At corners, raise the needle tit! they clear the fabric.
Partially raise the presser foot and carefully pi_ot the fabric.
When twin needle sewing ts completed, change needle and reset
tension if necessary.
To return to single needle sewing, press the Twin Needle button or turn
off the power switch.
NOTE: To avoid the thread twisting, it _s advisable to thread the machine
one thread at a time.
148