Briteq BT-W07L 12 Wash Manual De Instrucciones página 11

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
Defaults
Used to choose between 2 sets of default settings, often used by rental companies:
PRO-defaults: basic settings for use on professional DMX-controllers.
AUTO-defaults: basic settings for easy master/slave use.
 Press the MENU button until the display shows "Defaults".
 Press the ENTER: to avoid accidental loss of your settings, the display shows "Confirm?":
 Use DOWN and UP buttons to select "Yes" or "No" and confirm by pressing the ENTER button.
 When you select "Yes", you have the choice between 2 options, each with their own settings:
Settings
Channel mode
Slave Mode
Blackout Mode
Sound State
Sound Sense
Pan Inverse
Tilt Inverse
Backlight
Function Delay
Dimmer curve
Starting from these defaults you can easily make your additional settings. The other setup parameters
remain unchanged.
If you want to go back to normal running mode: press the MENU button for about 2 seconds.
Reset
Used to force a reset of the unit.
 Press the MENU button until "Reset" is blinking on the display.
 Press the ENTER to reset all channels to their standard position.
 To go back to the functions press the MENU button.
Please also check the chapter about the DMX-channel configuration of the unit to find out how you can force
a reset by DMX.
Offset Adjust
Used to adjust the home position:
If you're not already in the setup menu, just press
the MENU button shortly to enter the setup menu
("DMX Address" is shown on the display)
 Now press the ENTER button for at least 5
seconds to go into offset mode.
 Use DOWN and UP buttons to select the pan or the tilt
 Press the ENTER button, the display starts blinking.
 Use DOWN and UP buttons to adjust the home position
 Press the ENTER button to confirm your setting
To go back to the functions without any change press the MENU button again.
If you want to go back to normal running mode: press the MENU button for about 2 seconds, the new offset
parameters for the home position is preserved in flash memory.
BRITEQ
®
PRO def
AUTO def
12ch
4MSL
Slave 1
Slave 1
Freeze
No
Off
On
90
90
No
No
No
No
No
Yes
3s
3s
Mode1
Mode1
9/86
OPERATION MANUAL
BT-W07L12

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bt-q36l3 wash

Tabla de contenido