Ds250 Single Speed - Husqvarna DS150 Manuel De Instrucciones

DS250
• The stand is for drilling in roofs, walls and floors.
• The baseplate is made of aluminium making it very light in
weight. It has an inbuilt vacuum plate.
• The column can be tilted 0-60°.
• The drill stand is equipped with a quick connection plate
for the drillmotor.
• The wheel kit is removable.
• The feeder housing's transmission is adjustable. The
higher gives 2.25:1 and the lower, 1:1.
• Feed lever can be used to adjust base plate leveling
screws and set desired column tilt.
Accessories
• Collar to fit to the quick mounting bracket
• VP 200 Vacuum pump
PRESENTATION

DS250 Single speed

• The stand is for drilling in roofs, walls and floors.
• The baseplate is made of aluminium making it very light in
weight. It has an inbuilt vacuum plate.
• The column can be tilted 0-60°.
• The drill stand is fitted with a quick mounting bracket and
a collar.
• Feed lever can be used to adjust base plate leveling
screws and set desired column tilt.
Accessories
• Wheel set
• VP 200 Vacuum pump
– 5
English