Installer Checklist And Service; Installer Checklist; Before Calling Service; Product Data Rating Plate - Thermador HMCB30WS Manual Del Usuario

Installer Checklist

Final Check
Specified clearances maintained to cabinet
_____ surfaces.
_____ Appliance is level.
_____ All packaging material removed.
_____ Proper ground connection.
Owner is aware of location of the main circuit
_____ breaker
INSTALLER: Write the model number and serial
number found on the Product Data Rating Label
in the Use and Care Guide. Leave the Use and
Care Guide and the Installation Instructions with
_____ the owner of the appliance.
INSTALLER: Leave the Home Connect™ ins-
truction leaflet with the owner of the appliance.
In order to utilize the full feature potential of
the appliance, the owner should download the
Home Connect™ app on their smart device and
_____ pair the appliance to the home's Wi-Fi device.
To Clean and Protect Exterior Surfaces
• The stainless steel surfaces may be cleaned by wiping
with a damp soapy cloth, rinsing with clear water and
drying with a soft cloth to avoid water marks. Any mild
glass cleaner will remove fingerprints and smears.
• To polish and protect stainless steel, apply a stainless
steel conditioner with a soft cloth. The Thermador
Stainless Steel Conditioner is available for purchase in
the online eShop. (www.thermadoreshop.com). Order
part number 00576697.
• DO NOT allow deposits to remain for long periods of
time.
• DO NOT use ordinary steel wool or steel brushes.
Small bits of steel may adhere to the surface causing
rust.
• DO NOT allow salt solutions, disinfectants, bleaches
or cleaning compounds to remain in contact with
stainless steel for extended periods. Many of these
compounds contain chemicals which could prove
harmful. Rinse with water after exposure and wipe
dry with a clean cloth.
Installation Instructions

Before Calling Service

Troubleshooting
See the Use and Care Guide for troubleshooting informa-
tion. Refer to the Warranty in the Use and Care Guide.
Please be prepared with the information printed on your
product data rating label when calling.
To reach a service representative, see the contact informa-
tion at the back of the manual. Before calling, please note
the complete model and serial number printed on your
product data rating label.
Replacing a LED Lamp
The LED lights are replaceable by a service technician only.
See the service contact information.
Product Data Rating Label
The data rating label shows the model and serial number.
It is located under the filter. The data rating plate shows
the model and serial number. Refer to the data label on the
appliance when requesting service.
The data rating label is located on the frame behind the
filter. Remove the filter to view it.
English | 21 |