Advance Planning; Before You Begin; Parts Included; Tools And Parts Needed - Thermador HMCB30WS Manual Del Usuario

Ocultar thumbs Ver también para HMCB30WS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Advance Planning

Before You Begin

CAUTION
Before installing, turn power OFF at the service panel.
Lock service panel to prevent power from being turned
ON accidentally.

Parts Included

Hood assembly (lamps and blower
already installed)
8" Metal transition with backdraft
damper
Grease filters
Fastener assortment*
* Hardware provided is for mounting through standard
thickness drywall or plaster into wood studs. Installers
are responsible to provide hardware for other types of
mounting situations.

Tools and Parts Needed

Ducting as needed (refer to Equivalent Duct Lengths
for Commonly Used Transitions Table)
Aluminum tape (DO NOT use duct tape)
1/2'' (13 mm) Conduit if required (follow local codes)
1'' (25.4 mm) Strain relief
Ducting as needed
Blower
Flat head and Phillips screwdrivers
Drill with 3/16'' (4.76 mm) drill bit
Circular saw or jigsaw
3/8'' (9.52 mm) nut driver or socket and ratchet
Wire stripper
Protective work gloves
IMPORTANT: DO NOT throw away any packaging until
appliance is fully installed.
Installation Instructions
Optional accessories available for separate
purchase.
Refer to www.thermador.com for more details.
CHXTHMCB – Telescopic Duct Cover Extension Kit
RECHMCB – Recirculating Kit
CHFHMCD – Charcoal Filter Replacement Kit
REMCPW – Built-In Remote Control Accessory
English | 7 |

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hmcb36ws

Tabla de contenido