Advanced Planning; Before You Begin - Thermador PROFESSIONAL Serie Manual De Instrucciones

Ocultar thumbs Ver también para PROFESSIONAL Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Advanced Planning

Before You Begin

CAUTION
Before installing, turn power OFF at the service panel.
Lock service panel to prevent power from being turned
ON accidentally.
Parts Included
Metal transition with backdraft damper
Stainless steel baffle filters
Filter spacers
Grease trays
175W Heat lamps
Remote blower adapter
Wooden bracket used as Hood
Mounting Bracket (part of install- DO
NOT THROW AWAY)
Fastener assortment
Literature packet
Installation Instructions
Tools and Parts Needed
Aluminum tape (DO NOT use duct tape)
1/2'' (13 mm) Conduit if required (follow local codes)
1'' (25.4 mm) Strain relief
EXTNCB25 – 25 ft. Blower Connector Cable for distances
up to 25 ft.
Ducting as needed
Blower
Flat head and Phillips screwdrivers
Drill with 3/16'' (4.76 mm) drill bit
3/8'' (9.52 mm) nut driver or socket and ratchet
Wire stripper
Protective work gloves
Optional accessories available for separate purchase.
Refer to www.thermador.com for more details.
EXTNCB25 – 25 ft. Blower Connection Cable
IMPORTANT: DO NOT throw away any packaging until
appliance is fully installed.
WARNING
To avoid risk of burn, turn the hood ON when cooking at
high heat or when flambéing food.
DO NOT use all heating elements or gas burners
simultaneously at high settings for a prolonged period.
(max.15 minutes).
If the hood is located over a gas cooktop, operate the
hood at maximum setting whenever three or more gas
burners are being used.
DO NOT operate the ventilation system during a cooktop
fire.
English | 5 |

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Professional ph60gs

Tabla de contenido