Parts Detail; Product Specifications - Permobil ROHO HARMONY Manual Del Usuario

Cautions, Continued
• DO NOT expose the product to high heat, open flames, or hot ashes.
• If the cushion has been in temperatures lower than 32º F (0º C) and exhibits unusual stiffness,
allow the cushion to warm to room temperature.
• DO NOT use the inflation valve as a handle for carrying or pulling the cushion. Carry the cushion by
the cushion base or by the carrying handle on the cover.

Parts Detail

Package Contents:
Cover
Repair Kit
To order replacement parts, contact your product provider or ROHO, Inc.

Product Specifications

Materials: Overlay: PVC, made without DEHP; Inflation Valve: nickel-plated brass; Contoured Foam Base:
polyurethane; Cover: two-way stretch, fluid-resistant top, fluid-resistant sides and inner pocket, inner and outer
zippers located in the back of the cover, and a non-skid bottom with hook and loop fasteners to help secure the
cushion in the chair. Refer to cover care label for material content.
Cushion Width (in.)
H1416C 133/4
H1616C 16
H1618C 16
H1716C 17
H1718C 17
H1816C 181/2
H1818C 181/2
H2018C 20
Average Weight: 2 lbs. (0.8 kg) Average height range*: 21/2 - 41/2 in. (6.5 - 11.5 cm). *Contoured Foam Base and
Overlay height varies. Weight and height measurements based on H1816C.
Note: All measurements are approximate and may vary depending on level of inflation.
Cushion expected lifetime: 5 years
ROHO HARMONY Cushion Operation Manual
Front
Hand Pump
Depth (in.)
16
16
173/4
16
173/4
16
173/4
173/4
Overlay: Air Cells
Back
Zipper
Valve
Carrying Handle
Product Registration Card
Width (cm)
35
40.5
40.5
43
43
47
47
51
3
Contoured Foam Base
Valve Flap
Operation Manual
Depth (cm)
41
41
45
41
45
41
45
45