Franklin Electric ST Serie Manual Del Usuario página 6

Equipment for Submersible Turbine Assembly
*Please see Mi2011 STS assembly manual for instructions on how to properly assemble a STS Submersible
Turbine Pump.
The minimum basic hand tools and equipment needed for submersible turbine assembly:
• Assembly Fixture Kit 305386901
• 6 x 6 Collet Hammer 305385101
• 8 x 6/8 x 8 Collet Hammer 305385102
Allen Wrenches – SAE or Standard (preferably T-handle design)
• 5/32" is used for sand collar set screws
• 1/8" is used for motor coupling set screws
• 3/8" for STS upthrust adjustment
Combination wrench or socket and ratchet set
• 5/16" for cable guard screws
• 7/16" for 6" sub turbine bowl bolts
• 9/16" for 8" sub turbine bowl bolts
• 1-1/8" for upthrust bolt and lock nut (for 8" STS assembly)
Other helpful tools:
• Flat head or standard large screw driver
• Ballpeen hammer
• Dow Corning 111 Valve Lubricant & Sealant (food grade grease)
• Loctite 243
• Fine emery cloth or steel wool for de-burring purposes.
Optional tool available: 305471902 6" STS bowl bolt assembly tool
6