Power supply
WARNING: To reduce the risk of fire, electricshock, personal injury, or property damage
when using the washer, follow these basic precautions:
•
Connect the washer to an individual branch circuit that:
Has a 120 V/60 Hz, 15 AM Pfuse or circuit breaker.
Will serve only the washer.
Do not use an extensioncord.
Use only the power cord that comes with your washer.
Grounding
,_
WARNING: To reduce the risk of fire, electricshock, personal injury, or property damage
when using the washer, follow the basic precautions.
For safety, the washer must be grounded.
The washer must be properly grounded. After a malfunction or breakdown of the machine,
proper grounding will reduce the risk of electric shock by providing minimum resistanceto the
electric current.
The washer comes with a power cord that has a three-prong grounding plug for use ina
properly installed and grounded socket.
Do not modify the plug that comes with the washer. If it does not fit the socket, havea proper
socket installed by a qualified electrician.
Improper connection of the grounding conductor may cause electric shock. To confirm the
washer is properly grounded, check with a qualified electrician or service person.
To prevent a risk of fire, electricalshock, or physical injury,all wiring and grounding must be
performed in accordance with the NationalElectricalCode ANSI/FNPA, No. 70 Latest Revision
and local codes and ordinances. It is the owner's responsibilityto accommodate adequate
electrical power for this product.
Do not connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
[_
If grounding is not available,add a circuit breaker between the wall socket and the washer
instead.
English o 9