Technical Data; Identification; Handling - GASPARDO SP DORADA Manual Del Usuario

ENGLISH

1.3 TECHNICAL DATA

Toolbar width
Row distance
Seed hopper capacity
Fertilizer hopper capacity
PTO
Power required
Weight (*)
No-load noise detection
(*) Without fertilizer and microgranulator.
The technical data and the models provided must be considered as non binding. We reserve the right to change them without notice.

1.4 IDENTIFICATION

Each single piece of equipment, is equipped with an identification
plate (15 Fig. 2), which bears:
- CE mark.
- Manufacturers mark.
- Name, business name and address of the Manufacturer.
- Type of machine.
- Registration of the machine.
- Year of manufacture.
- Mass, in Kilograms.
This information must always be quoted whenever assistance
or spare parts are needed.

1.5 HANDLING

If the machine has to be handled, it should be lifted by hooking
cloth ropes to the attachment points provided and
suitable hoist or crane with sufficient capacity (Fig. 1). Because
of the danger involved, this operation should be carried out by
trained and responsible personnel.
36
USE AND MAINTENANCE
4 row
U.M.
cm. 75
m
2,50
8-2"
feet
cm
75
inch 29
l.
l.
320
rpm
HP
60
KW 44
Kg
550
1210
lb
Lpam (A)
Lwa (A)
using a
5 row
cm. 75
3,20
10-5"
60
23
32
320
540
70
51
615
1353
92,3
109,7
The mass of the machine is on the identification Plate (15 Fig. 2).
Stretch the rope to keep the machine level.
The hook points can be detected by finding the "hook" symbol
(fig. 3). For machines of up to four rows, hook up at points: A, C
and D. For machines of more than 4 rows hook up at points: A, B,
C, D and E.
B C
6 row 6 row
cm. 75 cm. 45
4,20 2,50
14" 8-2"
75 45
29 17
560 320
90 70
66 51
662 740
1456 1628
A
D E
fig. 1
cod. 19501381