Maintenance; When The Machine Is New; At The Biginning Of The Seeding Season - GASPARDO SP DORADA Manual Del Usuario

ENGLISH

4.0 MAINTENANCE

Here follows a list of various maintenance operations to be carried
out periodically. Lowered operating costs and a longer lasting
seeding machine depend, among others, on the methodical and
constant observation of these rules. The snap hooking system,
practical and safe allows to lift the seeder for maintenance and
inspection (Fig. 15).
- The maintenance periods listed in this booklet are only
indicative and are for on normal conditions on use, therefore
be varied depending the kind of service, the more or less
dusty surroundings, seasonal factors, etc. For more
serious conditions of service, maintenance will logically
be done more often.
- Before injecting grease, the nipples must be cleaned to
avoid mud, dust and foreign bodies from mixing with the
grease, otherwise they will reduce or even annul the effect
of the lubrication.
6
fig. 52
60
CAUTION
4
2
USE AND MAINTENANCE
- Always keep oils and grease out of reach of children.
- Always read carefully the instructions and precautions shown
on the containers and on the product safety charts.
- Avoid skin-contact
- After use wash the equipment thoroughly.
- Treat the used oils and polluting liquids in conformity with
the laws in force.

4.0.1 WHEN THE MACHINE IS NEW

- After the first eight hours of work, check that all the bolts are still
tight.

4.0.2 AT THE BIGINNING OF THE SEEDING SEASON

- Operate the empty seeding machine, the air-flow frees the pipes
from condensation and removes eventual impurities.
ATTENTION
3
1
5
cod. 19501381