Olivetti ECR 5800 Guía De Referencia Rápida página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
10. PROGRAM A SECRET CODE LINKED TO A CLERK NUMBER
1. Turn the PRG key to the PRG position.
2. Type [121] and then press the [Void] key to activate the Clerk system.
3. Type [444444] and press the [Amt Tend/Total] key. The symbol "C" is displayed on the left-hand side of the
operator and customer displays while the message "CLERK PASS" is displayed on the operator display.
4. Type a number to which the secret code will be linked.
5. Set a three-digit secret code by typing three [numeric keys].
6. Press the [Clerk] key.
Repeat the above operations (from step 4 to step 6) to assign a secret code to the remaining 14 Clerks or use
the [Clear] key to exit from Clerk Secret Code programming.
If you wish to change the clerk's secret code and the Clerk system is already activated, there is no need to perform
step 2 above.
Example: Assign secret code 106 to Clerk 1 for the first time.
Type/Press:
[121] + [Void] + [444444] + [Amt Tend/Total] + [1] + [106] + [Clerk]
11. DEFINE A CLERK NAME
To define a clerk name you can use either the Character Code Table provided in the Appendix of the Instructions
Manual or you can type the name directly by using the alphanumeric keypad.
Using the Character Code Table in the Instructions Manual:
1. Turn the PRG key to the PRG position.
2. Type the number of the Clerk whose name is to be defined.
3. Press the [Return] key. The letter "P" appears on the left-hand side of the operator and customer displays while
the message "CLERK NAME" is displayed on the operator display.
4. With reference to the Character Code Table in the Appendix of the Instructions Manual, type the string of
character codes to define the letters of a name and then press the [Check] key. Up to a maximum of 24 digits
can be entered. The name entered will be printed.
Example: Program Christina as the name for Clerk number 1.
Type/Press:
[1] + [Return] + [43 09 19 10 20 21 10 15 02] + [Check]
Using the alphanumeric keypad:
1. Turn the PRG key to the PRG position.
2. Type the number of the Clerk whose name is to be defined.
3. Press the [Return] key. The letter "P" appears on the left-hand side of the operator and customer displays while
the message "CLERK NAME" is displayed on the operator display.
4. Type the [Dept] key corresponding to the letter wanted. If the letter wanted is on the bottom half of the [Dept]
key, press the [Dept Shift] key first then the related [Dept] key. After entering the letter string wanted, press the
[Check] key. The name entered will be printed.
Example: Program Alex as the name for Clerk number 2.
Type/Press:
[2] + [Return] + [1/21 12/32 5/25] + [Dept Shift] + [4/24] + [Check]
6

Publicidad

Tabla de contenido
loading

Tabla de contenido