Replacement Parts - Panasonic ES‑LT7N Manual De Instrucciones

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

►Drying the shaver with the self-cleaning recharger

1. Attach the outer foil section to the shaver.

2. After removing excess moisture, wipe any remaining droplets

from the system outer foil, grip, and main body rear terminals.

3. Dry the shaver with self‑cleaning recharger using "Dry/Charge"

mode.

Note

Do not use the self‑cleaning recharger while droplets, soap, or

shaving gel remain on the shaver.

Doing so may change the concentration level or constituent of

the cleaning liquid in the cleaning liquid unit, which may degrade

cleaning, sterilization, and lubrication performance. This may

also cause cleaning liquid to spill from the self‑cleaning

recharger or prevent the blades from drying sufficiently.

Replacing the system outer foil and the inner blades

system outer foil

once every year

inner blades

once every two years

►Removing the outer foil section

Press the foil frame release buttons and lift the

outer foil section upwards.

►Attaching the outer foil section

After turning the foil frame mark (

securely attach the outer foil section to the shaver

until it clicks.

ES-LT7N_US.indb

) to the front,

►Replacing the system outer foil

1. Press the system outer foil release buttons

and pull down the system outer foil.

2. Align the foil frame mark (

) and the

system outer foil mark ( ) and securely

attach together until it clicks.

• The system outer foil cannot be reversely

attached.

• Always insert the system outer foil to the

foil frame when attaching to the shaver.

• Do not press the system outer foil

release buttons with excessive force.

Doing so may bend the system outer foil,

preventing complete attachment to the

foil frame.

►Replacing the inner blades

1. Remove the inner blades one at a time.

2. Insert the inner blades one at a time.