Bass Control; Treble Control; Balance Control - Yamaha C-5000 Manual De Instrucciones

Ocultar thumbs Ver también para C-5000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

H.

BASS control

Adjusts the low-frequency response in the range from
−10 dB to +10 dB (in 0.5 dB steps). The center position
produces a flat response.
I.

TREBLE control

Adjusts the high-frequency response in the range from
−10 dB to +10 dB (in 0.5 dB steps). The center position
produces a flat response.
J.

BALANCE control

Adjusts the audio output balance between the left and
right speakers in the range from L (the right channel is
muted) to R (the left channel is muted) to compensate
for sound imbalances caused by speaker locations or
listening room conditions.
8
Front panel
K.
EXT. DIRECT switch/indicator
If you press the EXT. DIRECT switch once, the EXT.
DIRECT indicator will light up, and the audio source
input at the EXT. IN jacks will be output at the connected
output jacks. For more information, refer to "Connecting
another preamplifier" (page 23) and "Selecting the
input and output" (page 28).
If you press the EXT. DIRECT switch again or rotate
the INPUT selector, the signal specified by the INPUT
selector will become the input source, and the EXT.
DIRECT indicator will turn off.
Note
If EXT . DIRECT is selected, no signal will be output at the
LINE 2 OUT (recording) jacks nor at the PHONES jack .

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido