Installation Instructions; Flow Diagram - Hansgrohe Logis Classic 71286000 Modo De Empleo / Instrucciones De Montoje

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pres-
sures.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
Connections R 1/2:
Centre distance:
The product is exclusively designed for drinking water!
4
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 70°C
65°C
max. 70°C / 4 min
cold right - hot left
150 ±12 mm
English
Symbol description
Do not use silicone containing acetic acid!
Operation (see page 34)
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Dimensions (see page 31)

Flow diagram

(see page 31)
Spare parts (see page 35)
Cleaning (see page 36)
Test certificate (see page 34)
Assembly (see page 32)