13. REGULATION
13.1. THERMOSTAT LOCATION
The unit must be installed and fitted in accordance with current safety
standards by a qualified technician.
Take care not to locate the thermostat in draughts created by doors and windows.
Also ensure that the thermostat is located in the room's normal thermal currents and that it is not located in shelving
or covered by curtains.
Any source of parasitic heat negatively influences temperature regulation accuracy. Therefore, avoid the sun's rays
or proximity to portable heating devices, electric lights, chimneys, televisions, etc...
²
Fitting height: about 1.50 m above floor level.
13.2. CONTROL
13.2.1. INFRA RED VERSION - INFRA RED REMOTE CONTROL
13.2.1.1. USE
Three modes available:
²
Cooling
²
Heating
²
Auto
For each of these modes, fan ventilation can be configured in LS, MS, HS and Auto
Ventilation modes.
13