Reset Function - Airwell K OG LN Manual De Instalación Y De Mantenimiento

RESET FUNCTION:

1. Remove one battery
2. Simultaneously press these 4 keys until the symbols are
no longer displayed
3. Reinstall the battery
The four keys to be pressed are:
NOTE :
Open the cover / flap to access the control keys.
ON / OFF key
Operating mode selection key for
COOLING
HEATING
AUTOMATIC COOLING / HEATING
REGULATION, FAN ONLY
I FEEL key: local detection of temperature
VENTILATION SPEED or AUTOMATIC
VENTILATION selection key
Set point increase key
Set point decrease key
SLEEP key (unoccupied mode)
"+" key: increases the operating time
"-" key: decreases the operating time
Liquid crystal diode display
I FEEL sensor
Infrared signal transmitter
ROOM key: display of the ambient temperature
LOCK key
SET key:Press for 5 seconds to set the time
The other buttons
the remote control are not active in this
version.
"Timer" function is available only in option with
remote control µBMS/RCW2
The Timer function is not available with Aquanet.
14
, , and of