Inspection And Storage; Warranty; Contents Of Package - Airwell K OG LN Manual De Instalación Y De Mantenimiento

2. INSPECTION AND STORAGE

At the time of receiving the equipment carefully cross check all the elements against the shipping documents in order
to ensure that all the crates and boxes have been received. Inspect all the units for any visible or hidden damage.
In the event of shipping damage, write precise details of the damage on the shipper's delivery note
and send immediately a registered letter to the shipper within 48 hours, clearly stating the damage
caused. Forward a copy of this letter to the manufacturer or his representative.
Never store or transport the unit upside down. It must be stored indoors, completely protected from rain, snow etc.
The unit must not be damaged by changes in the weather (high and low temperatures). Excessively high temperatures
(above 60 °C) can harm certain plastic materials and cause permanent damage. Moreover, the performance of
certain electrical or electronic components can be impaired.

3. WARRANTY

The units are delivered fully assembled, factory tested and ready to operate.
Any modification to the units without the manufacturer's prior approval, shall automatically render the warranty
null and void.
The following conditions must be respected in order to maintain the validity of the warranty:
² Commissioning shall be performed by specialised technicians from technical services approved by
the manufacturer.
²
Maintenance shall be performed by technicians trained for this purpose.
² Only Original Equipment spare parts shall be used.
² All the operations listed in the present manual shall be performed within the required time limits.
OF NON-COMPLIANCE WITH ANY OF THE ABOVE CONDITIONS.

4. CONTENTS OF PACKAGE

1 Cassette
2 Angle attachment fittings
1 Fastener bag:
² Angle brackets + screws
² Rubber shock absorbing pads
² Treated air distribution frame screws
² Front plate clips
1 Documentation bag
1 Front plate assembly
On opening the carton, check that all the accessories required for installation are present.
Keep the fascia grille in its packaging until it is to be finally installed.
THE WARRANTY SHALL BE NULL AND VOID IN THE EVENT
4