Programming The Timer: Minute Counter - Baumatic BO667TS-SO Manual Del Usuario

The oven now enters into stand-by and the oven light switches off. When it is time to
start cooking, the light will not be automatically switched on because it is logical to
assume that the delayed start coincides with your absence, so it is pointless to leave
the light on for no reason.

Programming the timer: minute counter

The minute counter is a function of the timer which is independent of the operation of
the oven, meaning that it does not block the cooking and does not switch off the oven,
but acts as a beeper. You can set it at any time, as a reminder to check cooking on the
hob, as well as the oven, or for other cooking activities.
This can also be used with the oven switched off. In this case all you have to do is
touch the timer function symbol.
If you use it with the oven switched on, you must touch the time function symbol three
times in a row.
Change the cooking end time to make it
coincide with the time you require. In our
example this is 1.00 p.m.
The control will automatically activate the oven
at 11:00 (1:00 p.m. –2 hours) and will switch it
off at 1.00 p.m., meaning that the roast will be
ready when you arrive home!
The dividing dots flash to indicate that it is
possible to set the value.
42