GE GPV10 Serie Manual Del Propietario E Instalación página 10

Ocultar thumbs Ver también para GPV10 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Instructions
Reinstallation
have access to the bottom front.
CAUTION
2. Remove both left and right front feet
from bottom.
3. Loosen the screws holding the bottom
hinge and remove it.
Middle
Hinge Pin
Two People Required
Screw
Holes
Middle
Hinge
4. Align the holes in the bottom hinge to
the corresponding holes on the opposite
side of the cabinet. Insert and tighten
the screws. Reinstall both front feet.
the left bottom hole of the refrigerator
compartment door over the bottom
hinge pin. Move door forward to make
it straight and align with middle hinge.
Install the middle hinge again, and turn
the hinge pin until it completely enters
the door body. Secure it with the screws
provided.
NOTE: Remove plugs from doorframe
and install on other side.
bottom hole of the door over the middle
hinge middle pin. Move door forward to
compartment. Place the hinge cover
over the left side of the top hinge, align
holes with hole on the refrigerator top
and tighten with the screws provided.
Insert the top hinge plug into the holes
on the cabinet top from which you
previously removed the 3 hinge screws
49-1000399 Rev. 1

Publicidad

Tabla de contenido
loading

Tabla de contenido