Philips PHILISHAVE 990 Manual Del Usario página 12

14-29 The shaving heads symbol
(together with the hair chamber and
brush symbols and the sound signal)
indicates that the shaving head slots,
the hair chamber and the shaving unit
(guards and cutters) should be
cleaned.
First clean the shaver head slots and hair chamber
as previously described. (See figs. 14-17.)
Then proceed with figs. 18-29 for cleaning the
shaving unit.
18
1
21
- (Fig.18-19) Release and remove the retaining plate.
The shaving heads remain in the shaving unit.
- (Fig. 20) Remove only one shaving head (guard
and cutter) at a time for cleaning to ensure that the
cutters and guards do not become mixed.
Each cutter has been ground together with the
guard.
If the guards and cutters are mixed, it may take
some weeks before optimal shaving performance
is restored.
- (Fig. 22) Clean the cutter by brushing only in the
direction of the arrow using the short bristled brush.
19
2
22
12
20
23