Operation - Dimplex DFB4047 Manual Del Propietário

Operation

Figure 3
A - Three Position On/Off
Switch
The power switch has two (2)
On positions marked with " I "
and " II ". The " I " position is for
manual operation. In this position
the built-in remote control is
bypassed.
The " II " position is for operating
the unit with the provided remote
control. When in " II " position
the unit is operated with the ON
and OFF buttons of the remote
control.
When the switch is in the center ("
O ") position the unit is off.
A
B - Heat Switch
The heat on/off switch supplies
power to the heater fan and the
heater element. When the switch
is in the On position the heater
operates if the thermostat calls for
heat.
C - Heater Thermostat Control
To adjust the temperature to
your individual requirements,
turn the thermostat control
clockwise all the way to turn
on the heater. When the room
reaches the desired temperature,
turn the thermostat knob counter
clockwise until you hear a click.
Leave in this position to maintain
the room temperature at this
setting. For additional heat, turn
clockwise until you hear the click
again and the heater will turn
B
C
on.
11