Maintenance; Light Bulb Replacement - Dimplex DFB4047 Manual Del Propietário

Operation
Battery Replacement
①
slide battery cover open on
the hand held transmitter
(Figure 3).
②
Correctly install one (1) 12 volt
(A23) battery in the battery
holder.
③
Close the battery

Maintenance

WARNINg: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.

Light Bulb Replacement

Allow at least 10 minutes for light
bulbs and heater to cool off before
touching bulbs to avoid accidental
burning of skin.
Light bulbs need to be replaced
when you notice a dark section
of the flame. There are two (2)
bulbs under the log set which
generate the flames and embers.
Approximate time: 15 minutes
to change the light bulbs.
Light Bulb Requirements
Quantity of two (2) clear chan-
cover.
battery must be recycled
or disposed of properly.
Check with your Local
Authority or retailer for recycling
advice in your area.
delier or candelabra bulbs with
an E-12 (small) socket base, 60
Watt rating. Example: GE 60bC or
Philips 60CTC.
Required tools: Phillips screw
driver.
Figure 5
Glass clip
and outer screw
13