Avery Dennison Monarch 9906 Referencia Rápida página 6

Push the deflector tab down.
4.
Slide the extra ribbon core onto the take-up reel as far as it
5.
will go.
Remove the new ribbon from the package.
6.
Slide the ribbon all the way onto the back reel. Carefully
7.
unwind a few inches from the bottom of the ribbon roll.
Feed the ribbon under both ribbon rollers and printhead.
8.
Ribbon
Rollers
Make sure the ribbon is straight and centered throughout the
9.
path.
Tape the ribbon to the take-up core.
10.
Rotate the take-up core until the leader is past the printhead.
11.
6-EN
Take-up Reel
Printhead
Assembly
Deflector Tab
Thumb
well