Switching The Device On Or Off - Siemens FDV241 Manual De Inicio

Setup
9.2

Switching the device on or off

20
Building Technologies
Fire Safety & Security Products
Fig. 5 Video Fire Controller – ON/OFF switch
Open the device. See Section 9.1: Opening/closing the device.
1.
To shut down the device, press the ON/OFF switch (1) for approx. 2 seconds.
2.
The device switches off, which can take several seconds.
Once the device is switched off, the Power LED (2) will no longer be lit.
Press the ON/OFF switch (1).
3.
The device boots up.
The Power LED (2) lights up.
Close the device. See Section 9.1: Opening/closing the device.
4.
11.2008