Installation - Klarstein 10029385 Manual Del Usuario

Preparation
If you have an outlet to the outside, your cooker hood can be connected as below
picture by means of an extraction duct (enamel, aluminium, flexible pipe or inflam-
mable material with an interior diameter of 150mm)
• Before installation, turn the unit off and unplug it from the outlet.
• The cooker hood should be placed at a distance of 65~75cm above the cooking
plane for best effect.
Installation (Vent outside)
When the range hood and appliance supplied with energy other than electricity are simultaneously in operati-
on, the negative pressure in the room must be not exceed 4 Pa (4 x 10
1. Drill 3 x 8 mm holes to accommodate the bra-
cket. Screw and tighten the bracket onto the wall
with the screws & screw plugs provided.
17

Installation

2. Offer up the cooker hood and hang onto the wall
bracket hook.
-5
Bar).