Klarstein 10029385 Manual Del Usuario página 20

Installation (Vent inside)
If you do not have an outlet to the outside, exhaust pipe is not required and the installation is similar to the one
show in section "Installation (Vent outside)".
Installing the Carbon Filter
NOTE: Carbon Filter is not standard accessory, these can be purchased as an accessory.
1. Activated carbon filter can be used to trap
odours.
3. Plug the activated carbon filter into the unit and
turn it in clockwise direction. Repeat the same on
the other side. Make sure the filter is securely lo-
cked. Otherwise, it would loosen and cause dan-
gerous. When activated carbon filter attached,
the suction power will be lower.
2. In order to install the activated carbon filter, the
grease filter should be detached first. Press the
lock and pull it downward.
4. Remove all blue protective film on chimney and
cooker hood, the installation is now finished.
20