Clima Manager Wired - Ariston CLIMA MANAGER Instrucciones Operativas

IT GB
Clima Manager (wired)
Press the Menu button.
Turn the knob and select the menu "Clima
Manager"; press the confi rmation button.
Turn the knob and select:
- General settings
press the confi rmation button, turn the knob
and select the parameter values to be dis-
played:
Software version
Hardware version
Zone no.
note:
the device must be placed in the zone where
it is installed.
The Clima Manager must be addressed in the
zone where installed. The Clima Manager will
have priority regarding the relative TA. (es. if
the Manager Climate is addressed in zone 1
correspondent TA 1 is not active.)
Press the exit button to return to the previ-
ous screen.
Turn the knob and select:
- Set contrast
press the confi rmation button and turn the
knob to change the display contrast value,
then press the confi rmation button. Turn the
knob and select:
- Backlight
press the confi rmation button and turn the
knob to enable or disable the display back-
light, then press the confi rmation button.
Turn the knob and select:
66
RemoCon
General
Set contrast lcd
Back light active
Reset
Service Code
Back
Backlight
selection
Enter