Helpful Hints And Tips - IKEA TILLREDA Manual Del Usuario

Ocultar thumbs Ver también para TILLREDA:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
You can also keep control panel locked
when the hob is not operating. This function
prevents an accidental operation of the
appliance.
Activate the child safety device
1. Activate the appliance with the ON/OFF
key. Do not set the heat settings.
2. Activate safety device function by
pressing the Lock key. The Lock key is
activated when it is lit up and a sound
is given.
3. Deactivate the appliance with the ON/
OFF key.
Deactivate the child safety device
1. Deactivate safety device function by
pressing the Lock key for 3 seconds. The
Lock key is deactivated when the light
stops and a sound is given.
Timer
1. The timer function is used to set cooking
time with a maximum time of 24 hours.
Press the Timer key to activate Timer,
the screen will display "00:00".

Helpful Hints and Tips

Cookware is suitable for induction
cooking zones if marked by the
manufacturer.
When a cooking zone is switched on, it
may hum briefly. This is a characteristic
of all ceramic glass cooking zones and
does not impair either the function or the
life of the appliance.
Cookware sizes
Induction cooking zones adapt automatically
to the size of the bottom of the cookware.
But, it must have a minimum diameter
depending on the size of the cooking zone.
2. Press
or
to set timer. Press
minutes, press
3. If there is no operation of time within
5 seconds, the timer will be cancelled.
4. During the Timer status, the power
level and time will be alternately
displayed in the screen. The timer can
be deactivated by pressing Timer key or
pressing ON/OFF.
5. When the timer has ended, the hob
will beep 5 times and switch off
automatically.
Automatic Switch off
The function switches the hob off
automatically if:
All cooking zones are switched off.
You do not set the heat setting after
switching on the hob within 1 minute.
You do not switch a cooking zone off or
you do not modify the heat setting after
2 hours, or if the overheating occurs
(e.g. when a pan boils dry).
Minimum diameter of
Cooking zone
cookware base [mm]
Middle rear
120
cooking zone
Energy saving
If possible, always place lids on the pans.
Place cookware on the cooking zone
before you switch it on.
The bottom of the cookware should be as
thick and flat as possible.
14
to set
to set hours.

Publicidad

Tabla de contenido
loading

Tabla de contenido