Glass Cleaning - Dimplex DS5629 Manual De Instrucciones

Maintenance
glass. Replace the logset re-
taining screw into the ember
bed.
7. Close the door.

glass Cleaning

The clear door is cleaned in the
factory during the assembly op-
eration. During shipment, instal-
lation, handling, etc., the clear
door may collect dust particles,
these can be removed by dusting
lightly with a clean dry cloth.
To remove fingerprints or other
marks, the clear door can be
cleaned with a damp cloth. The
clear door should be completely
dried with a lint free cloth to
prevent water spots. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
clear door surface.
RISK oF ELECTRIC SHoCK
Do noT oPEn
no uSER-SERVICEaBLE PaRTS InSIDE
Plastic Door Cleaning
To remove fingerprints or other
marks, the clear door can be
cleaned with a damp cloth. The
clear door should be completely
dried with a lint free cloth to
prevent water spots. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
clear door surface.
Stove Surface Cleaning
use warm water only to clean
painted surfaces of the Com-
pact Stove. Do not use abrasive
cleaners.
Servicing
Except for light bulb replacement
and cleaning described above, an
authorized service representative
should perform any other servic-
ing.
CAUTION
11