Maintenance And Cleaning - Palazzetti ECOPALEX Serie Manual De Instalación, Uso Y Mantenimiento

8

MAINTENANCE AND CLEANING

8.1 SAFETY PRECAUTIONS
Before carrying out any maintenance work, take the
following precautions:
A) Ensure that all parts of the replace are completely cold.
B) Ensure that the ashes are completely out.
C) Use individual safety gear as set forth by directive 89/391/
EEC.
D) Always use appropriate tools for maintenance.
8.2 CLEANING THE GLASS (FIG. 7.2)
While the replace is being used it is easier to clean the
pyroceram with lever (D) of Fig. 7.2. This lever is normally
positioned on ow closed. If it is moved, the ow of air
is opened which blows against the pyroceram making it
easier to clean.
If the deposits that form during combustion do not
disappear with the above procedure, you will have to wait
for the re to go out and then clean when the replace is
cold. To clean use a damp cloth or a ball of newspaper
that must be moistened and dipped in the ash – rub the
glass until it is completely clean.
At times, this procedure may not be enough. You can
then use appropriate detergents; however, be sure you
spray the product on a dry cloth and not directly on the
glass of the replace or the surrounding painted parts.
Under normal conditions, the glass does tend to turn black
when you light the re but this disappears once the re
is burning.
Pyroceram resists high temperatures very well, but
it is fragile, so DO NOT STRIKE IT.
8.3 GETTING RID OF THE ASHES (FIG. 7.3)
The ash box must be emptied when the re is out; the
front can be seen at the bottom. Access it by opening the
door of the replace. Open after having turned the lever
on the inside of the box clockwise.
It is advisable to throw the ashes away regularly to
guarantee an optimum ow of air for combustion.
8.4 REMOVING ASHES FROM THE FIREPLACE
(FIG. 7.4)
The stove requires simple but frequent and careful
cleaning to guarantee ef cient performance and regular
operation at all times.
• Open the door;
• remove any coals and ashes from the replace using
a m etallic shovel;
• remove the ash from the ash collection tank, using
an appropriate ash suction system;
• close the door.
INSTALLATION
00 477 0152 -04/2017 - PALAZZETTI - PN - I
TALY
Fig. 7.2
Fig. 7.3
Fig. 7.4
43