Product Description; Use And Operation - Klarstein 10030532 Manual Del Usuario

1 Power cord
2 Foot
3 Door frame
4 Glass door
5 Recessed handle
6 Door hinge
7 Water tray
8 Cold fan mask
9 Shelf
10 Door liner
11 Lamp cover
Before first Use
• Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the interior with a clean moist cloth.
• Insert the power supply cord into the socket.
Tips for Energy Savings
• Try not to open the door too often, especially when the weather is wet and hot. Once you open the door,
close it as soon as possible. Every now and then check if the appliance is sufficiently ventilated.
• Before loading the appliance with packages of fresh foods, make sure they are cooled to ambient tempera-
ture. For hot foods, please cool to room temperature before placing it in the refrigerator.
• Set it on higher temperature can minimize the energy consumption of the household refrigerating appliance
at ordinary temperature.
Operation
When the refrigerator works with full power, the two LEDs on the circuit board will flash. The red one shows the
power input status. The green one shows the output status of the cooling system. Meanwhile the fan inside
the refrigerator begins to work. When the door is opened, the light under the temperature adjustor will turn on
automatically. The temperature range for refrigerator is 10-18 °C. When the temperature is set on one certain
point and the temperature inside reaches this point, the automatic temperature control system begins to work
and the cooling system goes into linear temperature keeping status. Note: Wait 3-5 minutes before restarting
if you unplug the refrigerator. The unit may fail to operate properly if restarted too quickly.
7

Product Description

Use and Operation