Malfunctions; Technical Information - diversey TASKI aquamat 20 Manual De Instrucciones

Malfunctions

Malfunction
Machine without function
No suction or weak suction
Little or no water

Technical information

Machine
Working width
Rated voltage
Frequency
Rated power, nominal
Dimensions (LxWxH)
Main cord length
Maximum weight of operational machine
Tank capacity +/- 5%
Values according to IEC 60335-2-68
Sound pressure level LpA
Uncertainty KpA
Vibration
Uncertainty K
Splash water guard
Protection class
40
Possible causes
Machine is switched off
No power supply
Main cord defect
Motor does not turn
Main switch is switched off
Motor fault
Dirt in the squeegee
Cover not correctly put on
Gasket faulty or not available
Suction hose broken or fitting loose
Recovery tank full/float has triggered • Turn off the suction motor, empty
Drainage opening/filter blocked
Pump switched off
Spray nozzles blocked
Spray nozzles removed
Fresh water filter blocked
Troubleshooting
• Switch on the main switch
• Insert the power supply plug into
the mains socket
• Replace the main cord
• Contact your service partner
• Switch on the main switch
• Contact your service partner
• Remove the dirt
• Position the cover
• Replace the gasket if necessary
• Replace suction hose or tighten fit-
ting
and clean tank
• Empty the tank then clean the
drainage opening/filter
• Switch pump on
• Remove and clean spray nozzles
• Attach or replace spray nozzles
• Empty fresh water tank and clean
filter
aquamat 20
24 24
230-240V~ 100-120V~
50 60
900 900
80x38x72 80x38x72
15 15
25 25
22 22
70
2.5
<2.5
0.25
IPX4
II
Page
37
37
37
39
cm
AC
Hz
W
cm
m
kg
l
dB(A)
dB(A)
m/s2
m/s2