Teac Tascam CD-X1500 Manual Del Usuario página 11

2. Functions and Controls
, FLASH indicator
When flash start is activated, this indicator lights.
Flash start is on by default, or the last setting of
flash start will be retained. If you set it to OFF
then turn the power off, when power is turned back
on, flash start will be OFF.
. Memory bank indicators
Lights the current selected memory bank indicator.
/ A.CUE indicator
Lights when AUTO CUE function is turned on.
! A.RDY indicator
Lights when AUTO READY function is activated.
@ RELAY indicator
Lights when relay play is set to on.
# LOOP indicator
Lights when loop play is engaged.
$ S indicator
Lights when loop mode is set to single loop.
% ALL indicator
Lights when loop mode is set to all loop.
^ Time Address Bar
Shows the current play position relative to the
current track.
& PAR indicator
When FILTER is activated, this indicator lights
and displays the filter parameter.
* TEMPO indicator
Lights when parameter display shows the TEMPO
value.
( KEY indicator
Lights when parameter display shows the key
value.
Lights when key value is set to other than 0%.
) Parameter display
Displays the various parameters.
Q TAP indicator
Lights when parameter display shows the tap
value.
W KEY ORIGINAL indicator
Lights when key original function is activated.
TASCAM CD-X1500 DUAL CD PLAYER
English
11