Controlling Tvs With The Remote; Connecting A Usb Device - Sony DVP-SR320 Guía De Referencia

Ocultar thumbs Ver también para DVP-SR320:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EFFECT*
Selects the effects to be used for changing slides
during a slide show.
MODE 1: The images randomly cycle through
the effects.
MODE 2: The image sweeps in from top left to
bottom right.
MODE 3: The image sweeps in from top to
bottom.
MODE 4: The image sweeps in from left to
right.
MODE 5: The image stretches out from the
centre of the screen.
OFF: Turns off this function.
MEDIA
Selects the media type you want to play.
VIDEO: Plays video files.
PHOTO (MUSIC): Plays photo and music
files as a slide show. You can view a slide show
with sound when music and photo files are
placed in the same album. If the playing time of
either music or photos is longer, the longer one
continues without sound or image.
PHOTO: Plays photo files.
MUSIC: Plays music files. Press SUBTITLE
while playing music files that contain
unsynchronized lyric information. The player
supports MP3 ID3 Lyrics only.
* Depending on the file, this function may not be
possible.
To play VIDEO CDs with PBC
functions
When you start playing a VIDEO CD with
PBC (Playback control) functions, the menu
for your selection appears.
To play without using PBC
Press ./> or the number buttons while
the player is stopped to select a track, then
press N or ENTER. To return to PBC
playback, press x twice, then press N.

Controlling TVs with the remote

You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
If your TV is listed in the table below, set the
appropriate manufacturer's code.
When you replace the batteries of the remote,
set the appropriate code number again.
1 While holding down TV [/1, press the
number buttons to select your TV's
manufacturer's code.
2 Release TV [/1.
Code numbers of controllable TVs
Sony
Hitachi
LG/Goldstar/NEC 04
MGA/Mitsubishi
Panasonic
Philips
Pioneer
RCA
Samsung
Sharp
Toshiba

Connecting a USB device

You can connect a USB device to the USB
jack of the player to play video, photo, or
music files.
To remove the USB device
Stop playback and disconnect the USB device
from the USB jack.
To change LUN
For some devices, LUN (Logical Unit
Number) may appear. To change the LUN or
original storage, press
of albums or tracks is displayed.
About supported USB devices
• This player supports USB Mass Storage
Class only.
• This player supports FAT format USB
device only.
• Some USB devices may not work with this
player.
01 (default)
02
13
19
21
16
10
20
18
07
when the list
GB
5

Publicidad

Tabla de contenido
loading

Tabla de contenido