Cleaning - Silvercrest SAS 7.4 LI C2 Instrucciones De Uso

Ocultar thumbs Ver también para SAS 7.4 LI C2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Cleaning

To achieve the best results, empty the dirt container
after every use.
CAUTION! MATERIAL DAMAGE!
Do not use aggressive, chemical or abrasive cleaning agents. These could
damage the outer surfaces of the appliance.
1) To open the dirt container
dirt container
2) Remove the dust filter
3) Empty the dirt container
4) Pull the dust filter bag
5) Rinse the dust filter bag
dry before reinserting it into the dust filter
6) Reinsert the dust filter
that the dust filter
container
7) Replace the dirt container
Push the plastic tab on the underside of the handheld vacuum cleaner
into the recess on the dirt container
Press the release button
unit at the same time.
Let go of the release button
recess. The dirt container
8) Clean the housing and both nozzles with a lightly moistened cloth. For stubborn
soiling use a mild detergent on the cloth.
9) Dry all parts thoroughly before using the appliance again or storing it.
SAS 7.4 LI C2
q
, press the release button
q
.
0
from the dirt container
q
.
9
with its holder out of the dust filter
9
out in cold water and wait until it is completely
0
into the dirt container
0
is seated squarely and that the rubber lip seals the dirt
q
.
q
on the motor unit again:
8
and push the dirt container
q
q
and clean the dust filter
q
.
0
. Do not dry it with hot air.
q
. When doing so, ensure
q
.
8
so that the restraint engages in the
is now firmly seated on the motor unit.
0
8
and remove the
0
.
q
onto the motor
GB │ MT
 57

Publicidad

Tabla de contenido
loading

Tabla de contenido