Safety Instructions - Bosch ARD-AYBS6 Serie Instrucciones De Seguridad

LECTUS duo 3000

Safety Instructions

1.
2.
3.
WARNING!
Risk of damage to equipment!
-
-
WARNING!
Health and Safety!
Installation of the device must comply with any local fire, health
and safety regulations. A secured door that may be part of an
escape route from an area must be installed with:
-
-
WARNING!
Risk of damage!
Protect the hardware from electrostatic discharge by observing
ESD instructions before unpacking or touching connectors or
electronics.
Bosch Access Systems GmbH
Read, follow, and retain instructions - All safety and
operating instructions must be read and followed properly
before putting the unit into operation. Retain instructions
for future reference.
Do not ignore warnings - Adhere to all warnings on the
unit and in the operating instructions.
Power sources - Operate the unit only from the type of
power source indicated on the label. If unsure of the type
of power supply to use, contact your dealer.
Always switch off power of the device before modifying the
installation.
Do not connect or disconnect plug connectors, data cables
or screw connectors while power is on!
A fail-safe lock (A). So that the door will be released if
power fails. Ideally, a magnetic lock should be used.
A normally-closed break-glass or manual pull (B) in the lock
supply wiring, so that in an emergency the fail-safe lock
can be immediately powered down.
Technical manual
Safety Instructions | en
| V 1.2 | 2013.12
5