Casals VDSLI36 Manual De Instrucciones página 6

Fitting and removing screwdriving bits using the bit
holder extension (fig 3)
- Pull the bit holder (1) and fit the bit holder extension (14)
into the bit holder (1). Then press until snaps into place.
- Fit the screwdriving bit (15) into the the bit holder
extension (14) and press until it holds firmly.
- To remove the screwdriving bit (15) pull it out of the bit
holder extension (14).
- To remove the bit holder extension (14) pull the bit holder
(1) and then pull the bit holder out.
Adjust the handle position (fig 4, 2)
- In order to have access in tight and narrow places the
position of the handle can be adjusted.
- To do so press the handle release button (9) and swivel
the handle until snaps in to place.
- In order to recover the original handle position follow the
same procedure changing the swiveling direction.
How to select the direction of the rotation (Fig 1)
- Do not change the direction of the rotation whilst the tool
motor is in operation.
- The appliance has a selector (8), which allows the
direction of rotation to be changed.
Screwing torque adjustment (Fig 2)
- Turn the selector (10) from (1) to (16) until the desired
result is obtained.
Drilling and driving (Fig 2)
- Turn the selector (10) until the arrow on the appliance
(12) points to
Use:
- Turn the appliance on, by using the on/off switch (2).
Once you have finished using the appliance:
- Stop the appliance by releasing the on/off switch. (2)
Cleaning
- Allow it to cool before undertaking any cleaning task.
- Clean the equipment with a damp cloth with a few
drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning
the appliance.
- Do not let water or any other liquid get into the air vents
to avoid damage to the inner parts of the appliance.
- Never submerge the appliance in water or any other
liquid or place it under running water.
- If the appliance is not in good condition of cleanliness,
its surface may degrade and inexorably affect the
duration of the appliance's useful life and could become
unsafe to use.
Supplies
- Always use original supplies, designed specifically for
your appliance model.
- These supplies are available in specialist shops.
Anomalies and repair
- Take the appliance to an authorised technical support
service if a product damage or other problems arise. Do
not try to dismantle or repair without assistance, as this
may be dangerous.
- If the connection to the mains has been damaged, it
must be replaced and you should proceed as you would
in the case of damage.
Specifications:
- Rated Voltage (V):
- Battery capacity (A·h):
- No load speed (rpm):
- Ø max screw (mm):
- No. of torque settings
- Reversible
- Charging time (hours):
- Weight (Kg:)
- Acoustic pressure level (dB(A))
- Vibration (m/s2)
- Not suitable for use in presence of flammable anaesthetic
mixture with air or with Oxygen or nitrous oxide
NB: These specifications are subject to change without
notice of purpose of improvement.
VDSLI36 / VDSLI36K
3.6
1.3
180
6
16+1
yes
5
0.4
< 80
< 12
For E
reque
Ecolo
- The
consi
recycl
use th
of ma
- Res
batte
Autho
throw
- At
throw
Applia
and t
- The
subst
enviro
- Thi
Reme
conce