Auto Reconnect; Calling; Answering A Call; Transferring A Call - LG TONE ULTRA HBS-810 Manual De Instrucciones

Calling

- Voice Dialing and Last Number Redial features work with the primary mobile device (or
the mobile device that made the last outgoing call).
Call Waiting
- While on a call, press the CALL button for 1 second to answer an incoming call.
- To switch between two active calls, press the CALL button for 1 second.
- To end both calls, briefly press the CALL button.
- If both paired mobile devices are receiving an incoming call, the headset will default to the
primary device.

Auto Reconnect

- If in range of each other when the headset is powered on, the headset and the primary
mobile device will automatically reconnect.
- The secondary mobile device will need to be manually connected. Select LG HBS810
from the list of devices in the Bluetooth menu and pair.
NOTE: If a connection has been made, a vibrating alert is generated.
Out of Range
- If the paired devices are separated by a range of 33 feet (10 meters) or more, the
headset and mobile device will disconnect, and the headset will vibrate to alert you.
NOTE: To power off device vibration, slide the VOLUME jog button to the "+" position and
hold for 2 seconds.
- If the headset and mobile device do not automatically reconnect when they are back within the
required range, briefly press the CALL button on the headset to manually reconnect.
- While in multi-connection and streaming, the inactive paired device will be disconnected
when out of range. The headset will alert you once with no attempt to reconnect.
Calling

Answering a Call

- When receiving an incoming call, the headset will ring and vibrate.
- Briefly slide the VOLUME jog button to the "-" position to stop the vibration.
NOTE: The headset will not vibrate if vibration has been deactivated.
- Briefly press the CALL button to answer the incoming call.

Transferring a Call

- You can manually transfer the call to or from the headset by pressing the PLAY/
PAUSE/STOP button twice on the headset (mobile device and headset must
be paired).
How to Use
7