Environmental Protection; General Safety - Triton JOF001 Instrucciones De Uso Y De Seguridad

SYMBOLS

ENVIRONMENTAL PROTECTION

Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Conforms to relevant legislation
and safety standards.

GENERAL SAFETY

WARNING: Always wear ear protection where the
sound level exceeds 85dB(A) and limit the time of
exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and
provides the correct level of sound attenuation for the
level of sound produced by your tool.
WARNING: User exposure to tool vibration can result
in loss of sense of touch, numbness, tingling and
reduced ability to grip. Long term exposure can lead
to a chronic condition. If necessary, limit the length
of time exposed to vibration and use anti-vibration
gloves. Do not operate the tool with hands below a
normal comfortable temperature, as vibration will
have a greater effect. Use the figures provided in
the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification
are determined according to EN60745 or similar
international standards. The figures represent normal
use for the tool in normal working conditions. A poorly
maintained, incorrectly assembled, or misused tool, may
produce increased levels of noise and vibration. www.
osha.europa.eu provides information on sound and
vibration levels in the workplace that may be useful to
domestic users who use tools for long periods of time.
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
GB
serious injury.
WARNING: This appliance is not intended for use by
persons (including children) with reduced, physical
or mental capabilities or lack of experience or
knowledge unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children must be
supervised to ensure that they do not play with the
appliance.
Symbols / General Safety
4 4
Read instruction manual
Caution!
Class II construction (double insulated
for additional protection)
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.