Amprobe INSP-3 Manual De Uso página 11

• Faulty splices and connections
• Incorrect wiring
• Undersized wiring
• Faulty GFCIs,
• Faulty or incorrectly wired AFCIs
• Incorrect line voltage
• Poor ground quality
• User selectable 10,15 and 20 amps loads to verify
performance of the electrical system
• Incorrect wiring or voltage drop test failure is
clearly indicated by flashing screen
• Will not trip circuit breakers or blow fuses
during the test
• Tests GFCI and AFCI operations
• Check ground quality for safety and ability to
support sensitive electronic equipment
• Measure fault currents
• Save money and time by eliminating guess work.
NOTE: The Inspector™ 3 does not check the
condition of wiring insulation.
INSP-3 Notice:
Do not use the INSP-3 to test AFCI protection (Arc Fault
Circuit Interrupter) on the following breaker: Eaton
(Cutler Hammer) BRCAF120CS (20A)
Due to unique design of the AFCI protection, the INSP-3
is not able to trip it. The INSP-3 can perform all other
tests on this breaker per user manual.
This is the only known breaker type that the INSP-3
has limitations with testing (tripping) AFCI protection.
5