Makita XLC02 Manual De Instrucciones página 6

Type of filter
Normal filter
1 2
► 1. Capsule 2. Prefilter 3. Filter
High performance filter
1
► 1. Capsule 2. High performance filter
Disposing of dust
CAUTION:
• Empty the cleaner before it becomes too full, or
the suction force weakens.
• Be sure to empty out the dust inside the cleaner
itself. Failure to do so may cause the filter to be
clogged or the motor to be damaged.
Disposing of dust for normal filter
In order to drop dust sticking on the filter in the capsule,
tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
3
2
► 1. Capsule 2. Suction inlet
NOTE:
• Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
Remove accumulated dust from inside of capsule and
off of prefilter.
1
► 1. Prefilter 2. Capsule
Twist prefilter in direction of arrow to unfasten securing
lip from cleaner unit and then pull off prefilter.
1
► 1. Prefilter 2. Securing lip
Clean out fine dust from prefilter. Next, remove filter,
and lightly tap to dislodge dust.
6 ENGLISH
1
2
2
2