Tabla De Contenido; Description; Safety; Purpose Of This Manual - Greenlee 884 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information ........................................ 3
Setup ............................................................................. 4
Bending Conduit ........................................................... 5
Illustrated Bending Glossary ......................................... 6
Bending Instructions ................................................7-12
Laying Out One-Shot 90° Bends ............................... 7
Laying Out Offset Bends ........................................8-9
Laying Out a Segment Bend ...............................10-12
Illustrations and Parts Lists ....................................37-39
Optional Shoes and Accessories ................................ 40
Greenlee / A Textron Company

Description

The Greenlee 884 and 885 Hydraulic Benders are
intended to bend 1/2" to 4" GRC (galvanized rigid
conduit) and schedule 40 pipe when used with standard
aluminum bending shoes. The 884 and 885 bend up to
90° in one shot.
• Standard aluminum bending shoes bend 1-1/4" to 4"
GRC and schedule 40 pipe
• Optional aluminum bending shoes bend 1/2" to 1"
GRC and schedule 40 pipe
• Optional PVC-type shoes bend 1/2" to 4"
PVC-coated rigid conduit
• Optional ductile iron bending shoes bend 1" to 3"
pipe, schedule 40 through schedule 80
• Optional ductile iron bending shoe bends 4" pipe,
schedule 40 through schedule 120
In addition, the 885 Hydraulic Bender includes a
segment bending shoe for 5" conduit.
The 884 and 885 benders are to be coupled to any
Greenlee electric hydraulic pump with a usable oil
volume of 6 quarts or more. Suggested pump models
are the 980, 980-22FS, 980-22PS, and 960 SAPS.

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.

Purpose of this Manual

This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tools:
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
KEEP THIS MANUAL
2
884 and 885 Hydraulic Benders
884 Hydraulic Bender
885 Hydraulic Bender
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

885

Tabla de contenido