Tabla De Contenido; Description; Safety; Purpose Of This Manual - Greenlee 882 Manual De Instrucciones

Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information ........................................ 3
Identification .................................................................. 4
Setup ............................................................................. 5
Operating Instructions ................................................... 6
Glossary of Bending Terms ........................................... 7
Laying Out Bends ..................................................... 8-10
Special Bending Information Chart ........................ 11-13
Illustration-882 Series Hydraulic Benders ................. 43
Parts List-882 Series Hydraulic Benders .................. 44
Shoe Groups ............................................................... 45
Attachment Groups ..................................................... 46
Illustration and Parts List-Conversion Kit .................. 47
Greenlee / A Textron Company
882 and 882CB Hydraulic Benders

Description

The 882 Conduit Bender is intended to bend EMT
(electrical metallic tubing). The 882CB Conduit Bender
is intended to bend EMT, IMC (intermediate metallic
conduit), GRC (galvanized rigid conduit), and Schedule
40 Pipe. Bending shoes are available to accommodate
1-1/4" through 2" conduit and pipe.
The bender is to be coupled to any Greenlee hydraulic
pump capable of developing 10,000 psi (689.5 bar).
Suggested models include:
Hand Pump:
Electric Pump (120 V): 960 SAPS
Electric Pump (220 V): 976-22FS

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.

Purpose of this Manual

This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tools:
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
KEEP THIS MANUAL
2
755
975
976-22PS
882 and 882CB Hydraulic Benders
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070