Technical Specifications - Erreka AZIMUT AZS50E Manual Del Usuario

EC DECLARATION OF INCORPORATION FOR
PARTLY COMPLETED MACHINERY
(Directive 2006/42/EC, Annex II-B)
The manufacturer (*) Matz-Erreka,S.Coop., headquarters in
Bº Ibarreta s/n, 20577 Antzuola (Gipuzkoa), España
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
(*) (*)
AZS50E , AZS50EM
Identification number and year of manufacturing: typed on
nameplate
Description: electromechanical actuator for garage doors
- is intended to be installed on garage doors to create a machine
according to the provisions of the Directive 2006/42/EC.
The machinery must not be put into service until the final
machinery into which it has to be incorporated has been declared
in conformity with the provisions of the Directive 2006/42/EC
(annex II-A).
- is compliant with the applicable essential safety requirements
of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2006/95/EC.
Electromagnetic Compatibility Directive 2004/108/EC.
Radio Directive 99/05/EC
The relevant technical documentation is available at the national
authorities' request after justifiable request to:
Matz-Erreka,S.Coop.
Bº Ibarreta s/n, 20577 Antzuola (Gipuzkoa), España
The person empowered to draw up the declaration and to
provide the technical documentation:
Roberto Corera
Business Manager
Antzuola, 17/10/2011
(*) made in extra EU Countries on behalf of Matz-Erreka,S.Coop.

TECHNICAL SPECIFICATIONS

Power supply
Absorbed power
Lamp
Protection fuses
Door area
Average speed
Peak force
Nominal force
Working temperature
Rated Operating Time
Protection degree
Weight
25
AZS50E AZS50EM
230Vac - 50Hz 120Vac - 60Hz
100W 100W
230V - 25W 120V - 25W
SOURCE = 2,5A SOURCE = 2,5A
LIGHT = 2,5 A LIGHT = 2,5 A
< 8m 2 < 8m 2
110mm/s 110mm/s
500N 500N
350N 350N
-20 ÷ +40 °C -20 ÷ +40 °C
> 4 min. > 4 min.
IP20 IP20
10Kg 10Kg