Options; Extra Rinse; Fabric Softener - LG WT6001HVA El Manual Del Propietario

26
USING YOUR WASHING MACHINE

OPTIONS

Your washing machine features several additional cycle
options that customize cycles to meet your individual needs.
SOAK
This option provides a 15-180 minute presoak prior to the
start of the selected cycle. Touch the Soak button to select
the desired soak time from the popup menu. Use the Soak
option to presoak garments to help remove difficult spots
or stains on fabrics. At the end of the presoak time, the
selected cycle will begin with the same water used for the
soak.
STAIN CARE ™
Use this option for heavily soiled loads that need improved
stain treatment. When STAIN CARE is selected, the wash
cycle will begin with warm water to help prevent the setting
of certain types of stains. Then, as the cycle progresses,
hot water will be added to gradually increase the water
temperature to help remove stains that require treatment at
higher temperatures.
NOTE
y Best results are obtained with small loads (less than 6
lbs.)
COLD WASH ™
This option saves energy by using cooler water while
increasing the wash and rinse times to maintain wash
performance. Cold Wash is not available in Sanitary, Bright
White, Tub Clean, and Rinse & Spin.
NOTE
y Cold Wash is not available with Stain Care.

EXTRA RINSE

This option will add one or two extra rinses to the selected
cycle.
Touch the Extra Rinse button to select the desired number
of additional rinses from the popup menu. Use this option to
help ensure the removal of detergent or bleach residue from
fabrics. Liquid fabric softener, if used, is always dispensed in
the final rinse.
NOTE
y You cannot add extra rinses to the Drain & Spin cycle.
WATER PLUS
Select this option to add extra water to the wash and rinse
cycles. This option is especially useful for extra large or
bulky items. Once the washer has stopped filling, touch the
Pause button to pause the cycle. Touch the Change Settings
button, then select Water Plus. Touch the Start button to
resume the cycle.
NOTE
y If the machine reaches its maximum water level, Water
Plus will have no effect.
y You cannot select the Water Plus option in the Sanitary,
Bulky/Bedding and Tub Clean cycles.
To use the Water Plus function:
1. Pause the washer during the wash or rinse cycle once the
washer has stopped filling. (Water Plus is not available
during the spin cycle.)
2. Touch the Change Settings button.
3. Select Water Plus from the Cycle Settings screen.
4. Touch the Start button to resume the cycle.

FABRIC SOFTENER

Fabric softener is dispensed in the final rinse. This washer
is designed to save rinse water by using a jet spray rinse
system (Smart Rinse™) in COTTON/NORMAL and HEAVY
DUTY cycles. If you want to use fabric softener with either
of these cycles, touch the Fabric Softener button to change
the final rinse to a regular rinse. Although the softener will still
be dispensed without selecting FABRIC SOFTENER during
a spray rinse, failure to select either option will result in poor
fabric softener performance.
CUSTOM CYCLE
CUSTOM CYCLE allows you to store a cycle that you have
customized for your specific needs. This allows you to save
your favorite temperature, spin speed, soil level, and other
options for a cycle, and then recall them at the touch of a
button. A maximum of five custom cycles can be saved and
can be selected from the Custom Cycles screen.
To save a Custom Cycle:
1. Touch the POWER button to turn on the washer.
2. Select the desired cycle that you would like to customize.
3. Use the CYCLE MODIFIERS and OPTIONS to customize
the cycle .
4. Touch the Save Cycle button to save your custom cycle.